=================================
 Wegstr CNC controlling software
=================================

Thank you for choosing Wegstr CNC.

If the application does not run and shows the message "The application Wegstr can't be opened." please do following steps.

1. Right click on the application and select "New terminal at folder".

2. Make the Wegstr CNC software executable by running command (using "sudo"):
   sudo chmod +x Contents/MacOS/Wegstr


In case of the warning message "Wegstr cannot be opened because the developer cannot be verified." do following steps.

1. Go to the "System Preferences".

2. Open "Security & Privacy" option.

3. Click on "Open Anyway" button next to the message that Wegstr CNC software was blocked.
